LED fingertip pulse oximeter approved by FDA And CE with pink / green / blue / orange color
Technical Specification
| Display Information | Display Mode |
| Display Format | LED display |
| The Pulse Oxygen Saturation (SpO2) | Digital |
| Pulse Rate (PR) | Digital |
| Pulse Intensity (bar-graph) | Digital bar-graph display |
| SpO2 Parameter Specification |
| Measuring range | 35%-100% (the resolution is 1%). |
| Accuracy | 70%-100%;±2%, Below 70% unspecified. |
| Pulse Parameter Specification |
| Measuring range | 25bpm-250bpm (the resolution is 1 bpm) |
| Accuracy | ±2bpm |
| Pulse Intensity |
| Range | Continuous bar-graph display, the higher display indicates the stronger pulse. |
| Alert conditions |
| SpO2 | Less than 94% |
| PR | Less than 50bpm or more than 130bpm |
| Battery Requirement |
| 2 X 1.5V (AAA size) alkaline battery |
| Power Consumption |
| Smaller than 35 mA. |
| Battery Useful Life |
| Two batteries can work continually for 24 hours |
| Power off |
| The Oximeter can be powered off in case no finger is the Oximeter within 16 seconds. |
| Optical Sensor |
| Red light (wavelength is 660nm) |
| Infrared (wavelength is 905nm) |
| Dimensions and Weight |
| Dimensions | 62 (L)X37 (W)X32(H) mm |
| Weight | About 50g (with the batteries) |
Features:
-OLED display: Dual Color OLED display. Better shows the data.
-Multi-direction display: Rotatable multidirectional display. 4 directions, 6 modes, allow you to view your results in any direction.
-Alarm function: Set the alarm and beep according to your needs. There will be a warning once the measured values go beyond the setting. Know it immediately.
-With case: Small in volum, light in weight, convenient to carry. With a landyard and carrying case, convenient to use and to storage
-Long battery life: 1) Low-power consumption, continuously work for 6 hours.
2)In the absence of signal, the product will be in after 8 seconds to enter standby state.
